|
Install the PS-200 Panel Mount Dual TDS Controller to constantly monitor TDS levels of water produced by a high-output system.
Features
Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems.
Large, bright L.E.D. display.
An alarm will sound if the TDS level rises above the user-set level.
Installs easily in minutes.
The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line).
Specifications
Range: 0 - 999 ppm
Accuracy: ±2%
Resolution: 1 ppm
ATC: Yes (1 - 65 degrees Celsius)
Calibration: Adjustable
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will open or close a circuit via dry contacts when the ppm level (out line/line 2 only)reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function)
Relay Voltage: 5V
Alarm: Optional steady beep for Out line/Line 2 (set by user)
Display: Bright 5/8" L.E.D. display
2 Probes: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 822.1 g (1 lb 14 oz)
|
Conditions of Use 
RSS Feed