100 - 200 GPD System Upgrade Kit Previous 100 - 200 GPD System Upgrade Kit

75 GPD System Upgrade Kit

Rating:
100 % of 100
£50.40
In stock
SKU
OS-UGK75
Add this kit to your existing 75gpd system to enable faster pure water production rates whilst benefitting from lower waste water volumes. Recycling through a second membrane conserves water and increases pure water production rates under ideal operating conditions of water pressure and temperature.
  • Increase existing pure water production rates*
  • Reduce waste by up to 50%
  • Fitting Instructions included
*Requires at least 60psi water pressure for best results.

These Reverse Osmosis Upgrade Kits enable your system to produce pure water at much faster rates by recycling waste water through a second membrane, thereby conserving water and doubling pure water rates under ideal operating conditions of water pressure and temperature.

To achieve best possible performance, your water supply must have a pressure of at least 60psi. Don't worry if your water supply pressure is lower, simply add one of our Booster Pumps to increase pressure and maximise the recovery rates and water savings from this upgrade kit. If your water supply conditions are optimum you can expect to double pure water production whilst reducing the waste water by half.

Our RODI upgrade kits are matched to your existing RO System membrane, this kit is for an existing 75GPD membrane system and will increase the production of your system to a maximum of 150 Gallons Per Day without using any more water. That means you'll be able to produce up to 23.75 litres per hour.

The Osmotics Upgrade Kit includes:-

  • 1 x 75 US gallon per day membrane
  • 1 x RO Membrane Housing with fittings
  • 1 x Metre of Green Tubing
  • 1 x Metre of Blue Tubing
  • 1 x 1/4 Inch Union Elbow Fitting
  • 1 x 1/4 Inch 3 Way Tee Fitting
  • 2 x Housing to Housing Clips
  • 1 x Fitting Instructions

This kit is compatible with most makes of RO and RODI systems. If you are unsure or need advice, please contact us prior to purchasing. We can make most systems compatible.

Recommended Conditions:

  • Minimum Water Pressure - 60 PSI
  • Max Water Pressure - 125 PSI
  • Recommended Water Temperature - 25°C
  • Recommended Max TDS - <300ppm

Water pressure can be increased by adding a booster pump before your RODI system if a pressure increase is required. Low pressure will cause slow production of pure water, with excess production of waste water. 

Note that high TDS water supplies may result in increased DI resin consumption, the system will still work as intended and increase pure water production rates whilst decreasing the amount of waste water, but the overall TDS from the system may be slightly higher than with a single membrane system. Due to this your DI resin will exhaust much quicker than normal, adding additional or larger deionisation stages will offset this feature.

More Information
Filter Type RO Membrane
Thread Size 1/8" Thread
Tube Size 1/4" Tube
Manufacturer Osmotics
Weight 1.100000
SKU OS-UGK75
Write Your Own Review
Write a Review75 GPD System Upgrade Kit
To Top