Product added to cart
CIC-152-N / CIC-152-4 Dual Control Dosing/Injection TDS/EC
Next
EC Range: 0-9999 µS TDS Range: 0 - 5000 ppm Temperature Range: 1-75°C; 33-167 °F Accuracy: ±2% (of the reading) Conversion Factor: NaCl (avg. 0.5) Resolution: 0.1 µS/ppm (0-999); 1 µS/ppm (1000-9999) ATC: Yes (1 - 65°C) Calibration: Digital by push button Set-Point: Single point, controlled by on-screen up/down buttons (to any point within the range) Relay Control: The unit will open or close a circuit via dry contacts when the ppm/µS level reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. Relay Voltage: 5V Output Signal: 4-20mA Output Accuracy (mA): ±1% Alarm: Optional steady beep (set by user) Display: Bright 5/8 Inch L.E.D. display Probe: 1/2 Inch bushing (NPT), 3 meter (9.8 ft) shielded cable Power supply: AC 110V / AC 220V Dimensions: 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in.) Monitor Weight: 241 g (8.5 oz) Total (Shipping) Weight: 610 g (1 lb 5.5 oz)
PSC-154 TDS/EC Controller with 4-20mA Output
£286.80
Out of stock
SKU
PSC-154
The PSC-154 controller monitors and controls TDS/EC levels for high output commercial systems. It has extended range, digital calibration, on-screen temperature, tri-color display and 4-20mA output.
Features.
- Monitors and controls TDS/EC levels for high output commercial systems.
- Large, bright L.E.D. display.
- 4-20mA output signal can connect to a PLC to record values.
- An alarm will sound if the TDS /EC level rises above the user-set level.
- A switch will control a device based upon the set point.
- On-screen temperature display (C/F).
- Installs easily in minutes.
- Includes one sensor probe (at no extra cost) (part #SP-1-PSC).
New controller includes extended range, digital calibration, on-screen temperature and tri-color display.
Features.
- Monitors and controls TDS/EC levels for high output commercial systems.
- Large, bright L.E.D. display.
- 4-20mA output signal can connect to a PLC to record values.
- An alarm will sound if the TDS /EC level rises above the user-set level.
- A switch will control a device based upon the set point.
- On-screen temperature display (C/F).
- Installs easily in minutes.
- Includes one sensor probe (at no extra cost) (part #SP-1-PSC).
Specifications
| Manufacturer | HM Digital |
|---|---|
| Weight | 0.800000 |
| SKU | PSC-154 |
Write Your Own Review
Related Products